REMOVAL
Remove rear bumper fascia. Refer to Removal and Installation.
Disconnect automatic back door warning buzzer harness connector.
Remove automatic back door warning buzzer mounting nuts
, and then remove automatic back door warning buzzer
.

INSTALLATION
Install in the reverse order of removal.
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check lntelligent Key unit power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YE ...
Diagnosis Procedure
NOTE:
CHECK COOLING SYSTEM
Check engine coolant level and check for leakage. Refer to ENGINE COOLANT : Inspection.
Check reservoir tank cap. Refer to RESERVOIR TANK CAP : Inspection.
Check water flow sounds of the engine coolant. Refer to ENGINE COOLANT : Refilling.
Is the inspection result normal? ...