WARNING:
REMOVAL
Remove rear wheel house protector mounting bolts, nuts, and fixing clips, and then remove rear wheel house protector.
Remove U nut from rear wheel house protector.
INSTALLATION
Install in the reverse order of removal.
Exploded ViewRemoval and Installation
REMOVAL
Remove the headlining assembly. Refer to Removal and Installation.
Disconnect the antenna feeder connector.
Remove the mounting nut.
Remove the roof antenna from the vehicle.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Be careful about tightening ...
General Specifications
Applied model 4WD VR35DDTT Final drive model R240 (DL) Gear ratio 3.357 Number of teeth (Drive gear/Drive pinion) 47/14 Number of pinion gears 4 Drive pinion adjustment spacer type Collapsible Oil capacity Refer to Fluids and Lubricants. ...
SRT Set Driving Pattern
CAUTION:
Always drive the vehicle in safe manner according to traffic conditions and obey all traffic laws.
*1: Depress the accelerator pedal until vehicle speed is 90 km/h (56 MPH), then release the accelerator pedal and keep it released for more than 10 seconds. Depress the accelerator pedal until ...