CAUTION:
Clean back door window glass and rear wiper refill so that back door window glass may not be damaged by dust, etc.
REMOVAL
Operate rear wiper to the auto stop position. Refer to System Description.
Remove rear spoiler. Refer to Removal and Installation.
Remove rear wiper arm mounting nut.
Remove rear wiper arm.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Clean rear wiper arm installation location as shown in the figure, and then fully insert rear wiper arm to prevent nut from being loosened by shakiness.

Before installation, operate rear wiper to the auto stop position.
When installation, install so that it is within the specified position. And after installation, operate rear wiper, and then check that rear wiper blade stops at the specified position. Refer to Adjustment.
Rear Wiper Arm
AdjustmentSelection of Repair Tools
Tools for paintless dent repair are hammers, spoons, dollies and punches. Some popular hand tools for paintless dent repair and application examples are described below.
Choose suitable tools to repair the panel.
There are three basic tools being used. Levers, Glue System and Hotbox. The choice of ...
Exploded View
Frame Upper link Steering knuckle : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignition switch ON.
Select “Work support” in “AWD/4WD”.
Perform “Unit parameter writing” to t ...