REMOVAL
Make a clearance by remove rear end portion of front center console rear finisher assembly. Refer to Exploded View.
Press the power socket fixing pawls from the back of the front center console rear finisher assembly to extrude the power socket.

![]() | : Pawl |
Disconnect harness connector, and then remove the power socket.
INSTALLATION
Note the following, and then install in the reverse order of removal.
CAUTION:
Align the cut out
of power socket and front center console rear finisher assembly.

![]() | : Cut out |
Removal and Installation
WARNING:
When working, be careful to prevent accidental explosion front side air bag module and front center air bag module (with front center air bag module). Refer to Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER".
CAUTION:
When removing and installing t ...
Removal and Installation
REMOVAL
CAUTION:
Luggage Floor Rear Board
Remove luggage floor box. Refer to Removal and Installation.
Remove belt bracket mounting bolt of luggage floor rear board, and then remove luggage floor rear board.
Luggage Floor Board RH
Fold down the third seat RH forward.
Remove rope hook.Disengage r ...
Basic information
The Nissan Armada driving recorder system is designed to capture high-quality
video and photo footage from both the front and rear of the vehicle, providing an
additional layer of safety, documentation, and convenience. All recorded content
can be easily accessed and reviewed directly on the N ...