REMOVAL
Remove rear center tray assembly. Refer to Removal and Installation.
Press the USB power socket fixing pawl from the back of the rear center console box to remove the USB power socket.

![]() | : Pawl |
INSTALLATION
Note the following, and install in the reverse order of removal.
Align the cut outs of USB power socket and rear center console box.

![]() | : Cut out |
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Diagnosis Procedure
NOTE:
Check that refrigerant is enclosed in cooler cycle normally. If refrigerant amount is shortage from proper amount, perform the inspection of refrigerant leakage.
CHECK MAGNET CLUTCH OPERATION
Check magnet clutch. Refer to Diagnosis Procedure.
Does it operate normally?
YES>>
GO TO 2.
NO ...
Diagnosis Procedure
CHECK DTC OF TRANSFER CONTROL UNIT
With CONSULT
Ignition switch ON.
Perform self-diagnosis for “AWD/4WD”.
Is any DTC detected?
YES >>
Check DTC detected item. Refer to DTC Index.
NO>>
GO TO 2.
CHECK 4WD SHIFT INDICATOR
Check 4WD shift indicator function. Refer to Component Functio ...