Disassembly and Assembly
PrecautionsPRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check the following items.
Damage, deformation and foreign matter pinching of the door mirror mechanism.
Damage of harness due to rubbing and pinching.
Interference with other components.
Installed incorrectly.
Is the inspection result normal?
YES>>
GO TO 2.
NO> ...
Removal and Installation
REMOVAL
Remove instrument pad A. Refer to Removal and Installation.
Remove switch bracket fixing screws , and then remove switch bracket .
Disengage automatic back door switch fixing pawls using a remover tool (A), and then remove automatic back door switch from the switch bracket.
: Pawl
IN ...