Nissan Armada 2025-2026 Service and Repair Manual: SERVICE NOTICE AND PRECAUTIONS FOR ROAD WHEEL : Precautions
Genuine NISSAN aluminum wheel is designed for each type of vehicle. Use it on the specified vehicle only.
Use Genuine NISSAN parts for the wheel nuts.
Always use them after adjusting the wheel balance. For the balance weights, use Genuine NISSAN aluminum wheel weights.
Use caution when handling the aluminum wheels, because they can be easily scratched. When removing dirt, do not use any abrasives, a wire brush, or other items that may scratch the coating. Use a neutral detergent if a detergent is needed.
After driving on roads scattered with anti-icing salts, wash off the wheels completely.
When installing road wheels onto the vehicle, always wipe off any dirt or foreign substances to prevent them from being trapped between the contact surfaces of wheel.
Never apply oil to nut and bolt threads.
When tightening the valve cap there is a risk of damaging the valve cap if a tool is used. Tighten by hand.
Other materials:
Removal and Installation
CAUTION:
Never bend the pawl of power window switch finisher.
REMOVAL
Remove power window switch finisher (driver side). Refer to Removal & Installation.
Disengage door lock and unlock switch (driver side) fixing pawls using a remover tool (A), and then remove door lock and unlock switch (driver ...
Removal and Installation
WARNING:
REMOVAL
Remove air breather hose A from transfer assembly.
Remove clip A .
Remove clip B .
Remove A/T air breather hose. Refer to Removal and Installation.
Release clip C and remove air breather hose assembly from bracket.
Separate each component part.
INSTALLATION
Note the follo ...
BSW system operation
Side indicator light
BSW indicator (vehicle information display)
Vehicle information display
Steering-wheel-mounted controls (right side)
The Nissan Armada BSW system becomes active at speeds above approximately 20
MPH (32 km/h), ensuring effective operation during typical driving ...
0.0048