Removal and Installation
Exploded ViewRemoval and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect front camera (driving video recorder) harness connector.
Push to the arrow the stopper , and remove the front camera (driving video recorder) from bracket .
INSTALLATION
Note the following, and install in the reverse ...
Ball Joint
Item Standard Swing torque 0.5 – 6.4 N·m (0.06 – 0.65 kg-m, 5 – 56 in-lb) Measurement on spring balance (groove position) Suspension arm 7.9 – 53.2 N (0.81 – 5.42 kg, 1.78 – 11.95 lb) Front lower link 5.9 – 74.5 N (0.61 – 7.59 kg, 1.33 – 16.74 lb) Rotating torque Suspen ...
Inspection
WARNING:
MOUNTING INSPECTION
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel hub and bearing as ...