Diagnosis ProcedureRefilling
WARNING:
IN CASE REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
Regarding brake fluid draining, refer to Work Procedure.
IN CASE NOT REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
CAUTION:
Check that there is no foreign material in the reservoir tank, and refi ...
Adjustment of Steering Angle Sensor Neutral Position
Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to Work Procedure.
×: Required —: Not required
Procedure Adjust the neutral position of steering angle sensor Removing/ installing ABS actuator and electric unit (control ...
Removal and Installation
WARNING:
REMOVAL
Water pipe 1
Remove engine cover. Refer to Removal and Installation.
Drain engine coolant. Refer to ENGINE COOLANT : Draining.
CAUTION:
Perform this step when the engine is cold.
Remove air inlet tube 1. Refer to Removal & Installation.
Remove water hose 2 and water hose 3 fr ...