| Symptom | Reference |
|---|---|
| Head Up Display screen is not displayed. | Refer to Diagnosis Procedure. |
| Head Up Display brightness is not changed. | Refer to Diagnosis Procedure. |
| Head Up Display screen is not displayed in the correct position. | Refer to Diagnosis Procedure. |
Diagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (rear RH).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the operation after replacemen ...
Exploded View
Back door panel Back door upper garnish Back door side garnish RH Back door lower finisher Back door pull handle Back door finisher cap*1 Automatic back door switch finisher*2 Back door inner finisher Back door side garnish LH : Clip : Pawl : Metal clip
*1: Without automatic back door sy ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...