Diagnosis Procedure
-
The displayed ambient air temperature is higher than the actual temperature.
-
The displayed ambient air temperature is lower than the actual temperature.
NOTE:
Check that the symptom is not applicable to the normal operating condition before starting diagnosis. Refer to Description.
CHECK AMBIENT SENSOR SIGNAL CIRCUIT
Check the ambient sensor signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace malfunctioning parts.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “Combination meter” and check the “OUTSIDE TEMP” monitor value.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace ambient sensor. Refer to Removal and Installation.
Other materials
Noise, Vibration, and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and SUSPECTED PARTS Symptom Reference
Vibration Shake Noise
Uneven rotating torque
×
×
Inspection
Center bearing improper installation
× ...
All Doors Do Not Lock/unlock or Trunk/back Door Do Not Open with Door Request Switch
Description
All doors do not lock/unlock using door request switch.NOTE:
Before starting diagnosis check that vehicle condition is as shown in “Conditions of vehicle”, and check each symptom.SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (remote keyless entry) ...
Advanced Ambient Light (instrument Panel Passenger Side)
Exploded View
Instrument finisher B
Advanced ambient light (instrument panel passenger side)
Indirect light RH
: Pawl
: vehicle front
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventin ...