Removal and Installation
REMOVAL
Remove steering column cover lower. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove tilt & telescopic switch.
 |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Engine Mechanical Tools and Preparation
Special Service Tool
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
KV10116200
(NI-26336-A)
Valve spring compressor
1. KV10115900
(NI-26336-20)
Attachment
2.KV10109220
( — )
Adapter
D ...
Accelerator Pedal Released Position Learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal position sensor ...
Intelligent Key System All Functions Cannot Operate (one Key)
Description
Intelligent Key system all functions cannot operate (door lock and engine start). (One Intelligent Key has the symptom, other keys operate normally.)SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) Door lock operation (remote keyless entry) Door lock oper ...