Unit: kPa (kg/cm2, psi)
| Tire size | Air pressure | |
| Front | Rear | |
| 265/70R18 116H | 240 (2.4, 35) | 240 (2.4, 35) |
| 275/60R20 115H | 230 (2.3, 33) | 230 (2.3, 33) |
| 275/60R20 115H [A/T (ALL TERRAIN)] | 240 (2.4, 35) | 240 (2.4, 35) |
| 275/50R22 111H | 240 (2.4, 35) | 240 (2.4, 35) |
| 265/70R18 116H (Emergency) | 350 (3.5, 51) | 350 (3.5, 51) |
BrakesRemoval and Installation
WARNING:
REMOVAL
Remove the hose clamp and separate air breather hose B from air breather .
Remove clip E from bracket .
Remove bracket mounting bolt () and remove bracket .
Remove clip D from body frame .
Remove clip C from body frame .
Remove air breather hose A from air breather t ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignition switch ON.
Select “Work support” in “AWD/4WD”.
Perform “Unit parameter writing” to t ...
Work Procedure
CAUTION:
After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to Description.
PREPARATION BEFORE CALIBRATION PROCEDURE
Park the ...