This procedure must be performed.
After replacement of a tire pressure sensor or BCM.
After replacement of tire or road wheel.
NOTE:
ID registration is unnecessary if there are no change in the positions of each wheels (tire pressure sensors) before wheel removal and after wheel installation.
After performing tire rotation.
Work Procedure
Work ProcedureDriving Video Recorder System
Start-up time (including parking recording)
It does not record for a few seconds after startup.
Recording and Wi-Fi communication may not be possible at high or low temperatures to protect parts.
Conditions for Recording
If you remove the battery during recording, recording may not be recorded for ...
Diagnosis Procedure
CHECK MOONROOF UNIT ASSEMBLY
Check the following items.
Damage, deformation or trapped foreign material of slide rail.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check m ...
Jump starting
To start your Nissan Armada engine using a booster battery, it is essential to
carefully follow the proper procedures and safety precautions outlined below to
avoid damage or injury.
WARNING
Improper jump starting of the Nissan Armada can result in a battery explosion,
causing severe inj ...