Preparation
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
|
Drift a: 61.0 mm (2.402 in) dia. b: 56.3 mm (2.217 in) dia. |
|
Installing front oil seal |
|
Drift a: 66.3 mm (2.610 in) dia. b: 61.9 mm (2.437 in) dia. |
|
Installing rear oil seal |
|
Drift a: 68.6 mm (2.701 in) dia. b: 58.0 mm (2.283 in) dia. |
|
Installing input oil seal |
| Power tool |
|
Loosening bolts and nuts |
Sealant or/and Lubricant
| Name | Description |
|---|---|
|
Genuine Liquid Gasket (Loctite 598 or equivalent) |
Application to mating surface of rear case |
Other materials
Front Oil Seal
Exploded View
Front output shaft
Front oil seal
Front case
Snap ring
Sprockets with chain
Snap ring
Rear case
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Apply transfer fluid.
: Apply Genuine Liquid Gasket, Lo ...
Rear Suspension Service Data and Specifications
Wheel Alignment
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION Item Standard
Camber
Degree minute (Decimal degree)
Minimum
−0°35′ (−0.58°)
Nominal
−0°05′ (−0.08°)
Maximum
0°25′ (0.41°)
Left and right difference*1
–0° 45′ (–0.75°) - 0 ...
Configuration (air Bag Diagnosis Sensor Unit)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagno ...