NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Transfer Fluid: Atx93c

Nissan Armada 2025-2026 Service and Repair Manual / Maintenance / Maintenance Procedures / Chassis Maintenance / Transfer Fluid: Atx93c

Inspection

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

FLUID LEAKAGE

Check transfer surrounding area (oil seal, drain plug, and filler plug etc.) for fluid leakage.

FLUID LEVEL

Remove filler plug . Then check that fluid is filled up from mounting hole for the filler plug.

CAUTION:

Never start engine while checking fluid level.

Install filler plug on transfer and then tighten to the specified torque.

CAUTION:

Never reuse filler plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

Draining

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

The ignition switch OFF.

Remove the drain plug .

Drain transfer fluid.

Install drain plug to transfer and tighten to the specified torque.

CAUTION:

Never reuse drain plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

Refilling

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

The ignition switch OFF.

Remove filler plug . Fill up with new transfer fluid up to mounting hole for the filler plug.

Recommended fluid and capacity: Refer to Fluids and Lubricants.

CAUTION:

Carefully fill the fluid. (Fill up for approximately 3 minutes.)

Leave the vehicle for 3 minutes, and check the fluid level again.

Install filler plug on transfer and tighten to the specified torque.

CAUTION:

Never reuse filler plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

    Other materials

    Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs). Check operation condition of the function that is malfunctioning. >> GO TO 2. CHECK ...

    Precautions
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...

    Power Socket
    Power Socket (front) Removal and Installation REMOVALRemove front center console body assembly. Refer to Removal and Installation. Press the power socket fixing pawls from the back of the front center console body assembly to remove the power socket. : Pawl INSTALLATIONNote the following, and ...