Exploded View
 |
Transfer assembly |  |
Transfer range position sensor | ||
 |
: N·m (kg-m, in-lb) |
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
-
Never damage the O-ring of position sensor.
-
Never contaminate or damage the O-ring mounting surface.
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
When replacing transfer range position sensor, performe writing unit parameter. Refer to Description.
Other materials
Engine Cooling System Symptoms
Symptom Table
Symptom Check items
Cooling system parts malfunction
Poor heat transfer
Water pump malfunction
Worn or loose drive belt
—
Multi-way control valve stuck closed
—
Damaged fins
Dust contamination or paper clogging
Physical damage
Clogged radiator cool ...
Front Door Regulator
Exploded View
Front door regulator assembly is assembled on front door module assembly. Refer to Exploded View.
Removal and Installation
Front door regulator assembly is assembled on front door module assembly. If you need replace front door regulator, refer to Removal and Installation.
Disassembly ...
Chassis Control
Symptom Table
INTELLIGENT TRACE CONTROLPerform self-diagnosis using CONSULT before the symptom diagnosis. Perform trouble diagnosis if any DTC is detected. Refer to DTC Index. Symptom Possible cause Inspection item
Intelligent trace control inoperative/ineffective
No intelligent trace control ...