Nissan Armada 2025-2026 Service and Repair Manual: Air Breather

Exploded View

	Transfer assembly		Air breather hose A		Clip A
	Hose connector		Clip B		Air breather hose B
	Clip C		Air breather
	: Always replace after every disassembly.

Removal and Installation

WARNING:

• Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

REMOVAL

Remove air breather hose A from transfer assembly.

Remove clip A .

Remove clip B .

Remove A/T air breather hose. Refer to Removal and Installation.

Release clip C and remove air breather hose assembly from bracket.

Separate each component part.

INSTALLATION

Note the following, and install in the reverse order of removal.

• For non-reusable parts, refer to Exploded View.

• Align rib of the air breather with the paint mark on the air breather hose, and install air breather hose so that the paint mark faced backward of the vehicle.

  

  : vehicle front

• Install air breather hose A with the paint mark facing leftward.

  

  : vehicle front

• Be sure to insert air breather hose to air breather tube until hose end reaches the end of tube.

• When inserting air breather hose A and air breather hose B to hose connector , be sure to insert it fully until its reaches the stop.

  

  CAUTION:

  Install each air breather hose with the painted mark facing towards the top of the vehicle.