Work Procedure
Work ProcedureWork Procedure
DESCRIPTION
The purpose of the operation inspection is to check that the individual system operates normally.
Check condition : Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)
CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning.
Set temperatur ...
Refilling
WARNING:
The ignition switch OFF.
Recommended fluid and capacity: Refer to Fluids and Lubricants.
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes, and check the fluid level again.
Install filler plug on transfer and tighten to the specif ...
Hazard warning flasher switch
Press the hazard warning flasher switch in the Nissan Armada to alert other drivers
when your vehicle must stop or is parked under emergency conditions. Once activated,
all turn signal lights will flash simultaneously to increase visibility.
WARNING
In an emergency, always move the Niss ...