Perform action test to verify the customer's concern.
Perform action test and check the system operation after system diagnosis.
NOTE:
Perform the Intelligent Blind Spot Intervention system action test after checking that the I-LI system operates normally because the Intelligent Blind Spot Intervention system shares components with the I-LI system.
WARNING:
CAUTION:
Fully understand the following items well before the road test;
System description: Refer to System Description.
Handling precaution: Refer to Precautions for Intelligent Blind Spot Intervention.
LDW/I-LI SYSTEM ACTION TEST
Perform the LDW/I-LI system action test.
LDW: Refer to System Description.
I-LI: Refer to System Description.
GO TO 2.
CHECK I-BSI SYSTEM SETTING
Start the engine.
Check that the I-BSI system setting can be enabled/disabled on the information display.
Turn OFF the ignition switch and wait for 5 seconds or more.
Check that the previous setting is saved when the engine starts again.
INSPECTION END
I-Bsi
TsrZero Point Reset
Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat.
If zero point reset is not performed, the initialization is incomplete and occupant detection system doe ...
Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the parts if necessary.
Shock absorber assembly for deformation, cracks, damage.
Piston rod on shock absorber assembly for damage, uneven wear, and distortion.
Welded and sealed areas for oil leakage.
INSPECTION AFTER INSTALLATION
With ...
Exterior (NISMO models)
Nissan Armada NISMO models feature unique aerodynamic components and sensor placements
that require special handling. These enhancements not only improve performance but
also give the Nissan Armada a more aggressive and sporty appearance.
Front sonar sensors
Front spoiler
Front fog l ...