Diagnosis Procedure
A malfunction of brake pedal feel (height or others) is detected when the brake pedal is depressed.
CHECK AXLE
Check that there is no significant looseness of axle.
-
Front axle
-
2WD models: Refer to Inspection.
-
4WD models: Refer to Inspection.
-
-
Rear axle: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace error-detected parts.
CHECK DISC ROTOR
Check the disc rotor runout.
-
Front: Refer to Inspection and Adjustment.
-
Rear: Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Grind or replace rotor.
CHECK BRAKE FLUID LEAKAGE
Check the brake fluid leakage.
-
Front: Refer to Inspection.
-
Rear: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace error-detected parts.
CHECK BRAKE PEDAL
Check the brake pedal items. Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Adjust the brake pedal items. Refer to Inspection and Adjustment.
CHECK BRAKING FORCE
Check the braking force.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Check each component of brake system.
CHECK BRAKE PERFORMANCE
Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal?
YES>>Normal
NO>>Check each component of brake system.
Other materials
Electronic Air Suspension
Layout
Air suspension RH duct assembly
Air tube (rear RH air spring)
Rear RH air spring
Rear RH shock absorber
Air tube (front RH shock absorber)
Front RH Shock absorber (With Built In Air Spring)
Front LH Shock absorber (With Built In Air Spring)
Air tube (front LH shock ab ...
Rear Door Sash Inner Cover
Removal and Installation
CAUTION:
Never damage rear door panel.REMOVALRemove rear door finisher. Refer to Removal & Installation.
Remove inside seal according to numerical order 1→2 indicated by arrows as shown in the figure.
Apply protective tapes (A) on rear door panel to protect it from d ...
Entry Assist/driving Position Return Function Does Not Operate
Diagnosis Procedure
CHECK LOG-IN FUNCTION
Check log-in function. Refer to System Description.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Work Flow.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check door lock/unlock using Intelligent Key button operation.
Does door lock/unloc ...