Refer to Wiring Diagram.
Starting SystemPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal and Installation
REMOVAL
2WD Models
Remove glove box assembly. Refer to Removal and Installation.
Remove passenger knee air bag module. Refer to Removal and Installation.
Disconnect A/C auto amp. harness connectors and .
: Vehicle front
Remove fixing screw , and then slide A/C auto amp. in the direction indica ...
Work Procedure
CHECK DTC
Check DTC.
Is any DTC detected?
YES>>
Repair malfunction(s) and erase DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK SRT STATUS
With CONSULT
On CONSULT screen, select “SRT & P-DTC”>>“SRT Status”.
Without CONSULT
Perform “SRT status” mode with Refer to On B ...