Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
WRITING VEHICLE SPECIFICATIONS
With CONSULT
Ignition switch ON.
Select "ELECTRIC SHIFTER".
Select "Replace ECU"
Perform the work according to the procedure displayed in CONSULT.
GO TO 2.
CHECKING THE SELF-DIAGNOSIS RESULT
With CONSULT
Check the DTC.
Is the DTC detected?
YES>>Check the detected DTC. Refer to DTC Index.
NO>>WORK END
Additional Service When Replacing Electric Shift Selector
When electric shift selector is replaced, always perform "Replace ECU" of CONSULT function to write vehicle specifications. For work procedure, refer to Work Procedure. ...
Additional Service When Replacing Sub-Tcm
WARNING:
When replacing the Sub-TCM, perform the following work. For work procedure, refer to Work Procedure.
WORK AFTER TCM REPLACEMENT
Vehicle specifications writing
NOTE:
Since vehicle specificatio ...
Other materials:
Work Procedure
STEP 1
Fully close the back door manually.
>>
GO TO 2.
STEP 2
Operate back door opener switch and perform automatic back door open operation.
>>
GO TO 3.
STEP 3
The back door fully opens.
Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning ...
Diagnosis Procedure
CHECK TIRE PRESSURE SENSOR INSTALLATION
Check visually that tire pressure sensors are installed to each wheels correctly.
NOTE:
In the following case, tire pressure monitoring system (TPMS) does not function.
Tire pressure sensor(s) are not installed.
Tire pressure sensor(s) of other cars are inst ...
Interior lights
Basic information
CAUTION
In the Nissan Armada, avoid leaving interior lights switched on for extended
periods when the engine is not running, as this may lead to battery discharge.
Always switch off all interior lighting before leaving the Nissan Armada
to preserve battery life and ens ...
0.0049