Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
WARNING:
CHECK DTC
With CONSULT
Start the engine.
Check DTC of all systems.
Is any DTC detected.
YES>>Check DTC detected item.
NO>>GO TO 2.
PERFORM TORQUE CONVERTER CLUTCH POINT LEARNING
With CONSULT
Check that the A/T fluid temperature is in the range of 60°C to 100°C (140°F to 212°F).
Check that the engine coolant temperature is in the range of 70°C to 110°C (158°F to 230°F).
Turn off air conditioner.
Apply the parking brake.
Release the accelerator pedal, depress the brake pedal and stop the vehicle completely.
Shift to the D position.
Select “Work supports” in “TRANSMISSION”.
Select "Torque converter clutch point learning".
Perform learning according to the CONSULT display.
WORK END
Descripton
WARNING:
TCM memorizes a torque converter clutch meet point, and this enables accurate control.
Torque converter clutch point learning must be performed when the following operation is performed. For ...
Calibration of Decel G Sensor
TCM stores calibration data (inherent characteristic value) of decel G sensor to provide accurate control.
Decel G sensor calibration must be performed when the following operation is performed. For w ...
Other materials:
Disassembly and Assembly
DISASSEMBLY
Disengage the pawl and turn EVAP canister vent control valve counterclockwise.
: Lock : Unlock
Remove the EVAP canister vent control valve.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
Do not reuse O-rings. ...
Inspection
DRIVE PLATE DEFLECTION
Appearance of Drive Plate
Check the drive plate and signal plate for defamation or damage.
CAUTION:
Do not disassemble drive plate.
Do not place drive plate with signal plate facing down.
When handling signal plate, take care not to damage or scratch it.
Handle signal pla ...
Harness repair procedure
HARNESS REPAIR OVERVIEW
Harness Repair Website and Resources
Wiring Harness and connector repair information including disassembly videos are located on the Harness Repair website. Links are found in ASIST and in the eWD. The website contains the following information:
Picture of connector with colo ...
0.0062