WARNING:
TCM memorizes a torque converter clutch meet point, and this enables accurate control.
Torque converter clutch point learning must be performed when the following operation is performed. For work procedure, refer to Work Procedure.
Replacing control valve & TCM
Replacing torque converter
Work ProcedureInspection
LEVEL
Check if the reservoir tank engine coolant level is within the “MIN” to “MAX” when the engine is cool.
: MAX : MIN
Adjust the engine coolant level if necessary.
WARNING:
Never remove reservoir tank cap when engine is hot.
CAUTION:
Refill Genuine NISSAN Long Life Antifreeze/Coolant ...
Underbody
WARNING:
MEASUREMENT (CABIN)
Bottom view
The following figure shows a bottom view of the vehicle.
Unit: mm (in)
: Vehicle front
: Vehicle left side
Unit: mm (in)
«The others» Point Dimension Memo Point Dimension Memo Point Dimension Memo – 1102 (43.39) – 1253 (49.33) – 1702 (67 ...
Inspection
INSPECTION AFTER REMOVAL
Examine with eyes that there is no stain, clogging, or damage on air cleaner filter.
Remove dusts (such as dead leafs) on air cleaner filter surface and inside cleaner case.
To clean air cleaner element, blow it from intake manifold side towards air intake side to remove tra ...