Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
Description
When AV control unit is replaced, AV control unit configuration is required.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to Removal & Installation.
>>GO TO 2
PERFORM AV CONTROL UNIT PROGRAMMING & CONFIGURATION
CONSULT
Perform AV control unit programming, according to “Replace ECU” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
CAUTION:
During programming, maintain the following conditions:
Ignition switch: ON
Electric load: OFF
Brake pedal: Not depressed
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
GO TO 3
WRITE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “WRITE VIN (MANUAL INPUT)” to write VIN data.
>>GO TO 4
CHECK NETWORK INITIAL SETTINGS
CONSULT Work Support
Select “Work Support” of “MULTI AV” and perform “Network initial settings”.
>>WORK END
Other materials:
Drying the Body Filler
When the hardener is mixed with the base, the filler begins to harden. Heat is also generated, which accelerates hardening. For this reason, filler drying speed varies with maximum thickness allowed..
If a thick coat of filler is applied, the generated heat remains inside, hence it hardens quickly. ...
Avoiding collision and rollover
WARNING
Improper or unsafe operation of the Nissan Armada may lead to loss of control,
serious accidents, or vehicle rollover. Always drive responsibly and remain fully
aware of road conditions and surroundings.
Stay alert at all times and practice defensive driving techniques when operating
...
Basic information
WARNING
Failure to properly follow the safety guidelines and operating instructions
for the Nissan Armada Intelligent Blind Spot Intervention (I-BSI) system may result
in serious injury or even fatal accidents.
The Nissan Armada I-BSI system is designed as a driver assistance feature
and ...
0.0068