Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Audio Amp.

Work Procedure

Description When AV control unit is replaced, AV control unit configuration is required. REPLACE AV CONTROL UNIT Replace AV control unit. Refer to Removal & Installation. >> GO TO 2 PERFOR ...

Work Procedure

CAUTION: When after replacing audio amp, Configuration must be performed. Or not doing so, audio amp. control function does not operate normally. REPLACE AUDIO AMP. Replace audio amp. Refer to Removal ...

Other materials:

Work Procedure
Always perform the distance sensor configuration after replacing the distance sensor. Always perform the radar alignment after removing and installing or replacing the distance sensor. CAUTION: The system does not operate normally unless the distance sensor configuration and the radar alignment are ...

Exploded View
Hood assembly Hood hinge RH Stud ball Hood stay RH Hood seal Hood bumper rubber 1 Hood bumper rubber 2 Radiator core seal Hood insulator Hood stay LH Hood hinge LH : Clip : Pawl : Body grease , : Indicates that the part is connected at points with same symbol in actual vehicle. ...

Inspection
INSPECTION AFTER REMOVAL Appearance Propeller Shaft Runout Propeller shaft runout : Refer to Propeller Shaft Tube. Propeller shaft runout measuring point (Point “”). : Vehicle front Dimension A : 130 – 150 mm (5.12 – 5.91 in) B : 150 – 180 mm (5.91 – 7.09 in) C : 734.0 m ...