Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
CHECK THE STEERING WHEEL
Is the steering wheel equipped with a cover or other materials?
YES>>Remove the steering wheel cover or other materials.
NO>>Inspection End.
Other materials:
Procedure for Applying Body Filler
(1) REMOVAL OF PAINT
Using an air sander, remove old paint and "scuffing" the panel surface for better filler adhesion. Form a featheredge on the panel surface approximately 20 mm (0.79 in) wider than the correction area in order to eliminate traces of body filler application.
(2) CHEMICAL CONVERSIO ...
Removal and Installation
WARNING:
REMOVAL
Without Air Suspension
Remove mounting bolts, and then remove side step.
Remove mounting bolts, and then remove side step bracket A.
With Air Suspension
Remove air tank. Refer to Removal and Installation.
Remove mounting bolts, and then remove side step.
Remove mounting bolts, and t ...
Work Procedure
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any means other than CONSULT.)
Replacing ABS actuator and electric unit (control unit)
CHANGE OF SYSTEM MODE
With CONSULT
Select “ABS”, "Work support", and "System mode change" according to this o ...
0.0063