Preparation
Special Service Tool
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
KV40104001 (NI-53385) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) |
|
Removing and Installing wheel hub lock nut. |
|
KV40107300 (NI-51751) Boot band crimping tool |
|
Installing boot band |
|
KV40107310 (-) Boot band crimping tool |
|
Installing boot band |
|
KV40107500 (-) Drive shaft attachment |
|
Removing drive shaft |
|
KV38107900 (NI-33904) (NI-52469-1) Protector a: 32 mm (1.26 in) dia. b: 25 mm (0.98 in) |
|
Installing drive shaft |
|
KV40108700 (-) Lock nut crimp punch a: 5 mm (0.20 in) b: 7 mm (0.28 in) |
|
Installing wheel hub lock nut |
|
KV40108800 (NI-52982) Lock nut chisel a: 44.5 mm (1.752 in) b: 10 mm (0.39 in) dia. c: 31 mm (1.22 in) d: 4.5 mm (0.177 in) e: 26 mm (1.02 in) f: 0.4 mm (0.016 in) g: 4 mm (0.16 in) h: 24 mm (0.94 in) |
|
Removing wheel hub lock nut |
Commercial Service Tool
| Tool name | Description | |
|---|---|---|
| Drive shaft puller |
|
Removing drive shaft joint sub assembly |
| Sliding hammer |
|
Removing drive shaft |
| Power tool |
|
Loosening bolts and nuts |
| Ball joint remover |
|
|
Lubricant or/and Sealant
| Name | Description |
|---|---|
| NISSAN Genuine grease or equivalent |
|
| Apply paste [service parts (440037S000)] |
|
Other materials
Memory seat
Basic information
The Nissan Armada memory seat system is designed to enhance comfort and personalization
by allowing drivers to store and recall their preferred driving positions effortlessly.
This advanced Nissan Armada feature includes:
Memory storage function
User profile linking to st ...
Front Air Mix Door Motor
Removal and Installation
REMOVALFront Air Mix Door Motor (Driver Side)Remove instrument lower panel LH and steering column cover lower. Refer to Removal and Installation.
Remove driver knee air bag module. Refer to Removal and Installation.
Remove side ventilator duct 2 LH. Refer to Removal and Inst ...
Front Pillar Finisher
Exploded View
Grommet
Front pillar finisher
Double-sided tape
[t: 2.5 mm (0.098 in)]
: Clip
: Always replace after every disassembly.
Removal and Installation
REMOVALFully open front door.
Apply a protective tape (A) on the parts to protect it from damage.
...










