NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: A/t Fluid Cooler Tube

Nissan Armada 2025-2026 Service and Repair Manual / Transmission & Driveline / Transaxle & Transmission. 9at: Ge9r01a / A/t Fluid Cooler Tube

Exploded View

A/T assembly A/T fluid cooler tube assembly Bracket
Bracket A/T fluid cooler hose A A/T fluid cooler hose B
To A/T fluid cooler. Refer to Exploded View.        
: Clip
: N·m (kg-m, in-lb)

Removal and Installation

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

REMOVAL

NOTE:

When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.

CAUTION:

Perform this step when the engine is cold.

Remove front bumper. Refer to Exploded View.

Remove front under cover. Refer to Removal and Installation.

Drain A/T fluid. Refer to Draining.

Remove A/T fluid cooler hose A and B from A/T fluid cooler. Refer to Removal and Installation.

Remove A/T fluid cooler hose A and A/T fluid cooler hose B from A/T fluid cooler tube assembly using the following procedure:

  1. Remove A/T fluid cooler tube cap from A/T fluid cooler tube assembly .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler tube assembly at the A/T fluid cooler hose side.

  3. Rotate suitable disconnect tool (A) (commercial service tool) counter clockwise 60 degrees to release snap ring.

  4. Remove A/T fluid cooler tube from A/T fluid cooler hose.

Remove the water hose clip A and B from the A/T fluid cooler tube assembly bracket. Refer to Removal and Installation.

Remove A/T fluid cooler tube assembly mounting nut () and remove A/T fluid cooler tube assembly from bracket.

Remove A/T fluid cooler tube assembly mounting bolt () and remove A/T fluid cooler tube assembly from bracket.

Remove A/T fluid cooler tube assembly from A/T assembly using the following procedure:

  1. Remove A/T fluid cooler tube cap from A/T fluid cooler tube assembly .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler tube assembly at the A/T assembly side.

  3. Rotate suitable disconnect tool (A) (commercial service tool) counter clockwise 60 degrees to release snap ring.

  4. Remove A/T fluid cooler tube from A/T assembly.

Remove bracket mounting bolts () and remove bracket .

Remove bracket mounting bolt () and remove bracket .

INSTALLATION

  • Installation is in the reverse order of removal.

  • Fill A/T fluid after installation. Refer to Refilling.

Inspection and Adjustment

INSPECTION AFTER INSTALLATION

Check for A/T fluid leakage. Refer to Inspecton.

ADJUSTMENT AFTER INSTALLATION

Adjust A/T fluid level. Refer to Adjustment.

    Other materials

    Intelligent Around View Monitor system operation
    The Nissan Armada Intelligent Around View Monitor utilizes multiple strategically positioned cameras 1, including units mounted in the front grille, beneath the outside mirrors, and above the rear license plate, to create a comprehensive multi-angle view of the vehicle surroundings. Basic ...

    I-BSI system limitations
    WARNING The following limitations apply to the Nissan Armada Intelligent Blind Spot Intervention (I-BSI) system. Failure to operate the vehicle within these limitations may result in serious injury or death. The Nissan Armada I-BSI system cannot detect all vehicles or objects in every si ...

    Intelligent Rear View Mirror
    Exploded View Intelligent rear view mirror cover LH Intelligent rear view mirror cover RH Intelligent rear view mirror Inside mirror base         : Pawl : N·m (kg-m, in-lb) Removal and Installation CAUTION: Never move intelligent rear view mirror beyond t ...