Exploded View
With Flap
 |
Active grille shutter | ||||
 |
: Clip |
Without Flap
|
Active grille shutter | ||||
|
: Clip |
Removal and Installation
REMOVAL
Remove front combination lamp. Refer to Removal and Installation.
Disconnect harness connectors and disengage harness clips.
Remove fixing clip 
and mounting bolts 
, and then remove active grille shutter.
INSTALLATION
Install in the reverse order of removal.
Other materials
Front Oil Seal
Exploded View
Front output shaft
Front oil seal
Front case
Snap ring
Sprockets with chain
Snap ring
Rear case
Rear companion flange
O-ring
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Apply transfer fluid.
: Apply Genuine Liquid Gas ...
Unbalance Steering Wheel Turning Force and Return Between Right and Left
Description
Unbalance steering wheel turning force and return between right and left.
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Pull the parking brake switch.
NOTE:
Check to make sure that the parking brake switch indicator is turned ON.
Ignition switch OFF.
Get out of the vehicl ...
Front Seatback
Disassembly and Assembly
WARNING:
When working, be careful to prevent accidental explosion front side air bag module and front center air bag module (with front center air bag module). Refer to Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER".CAUTION:
When d ...