Work Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit). For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure [After Replace ABS actuator and electric unit (control unit)]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to ABS actuator and electric unit (control unit) according to "Replace ECU" in CONSULT Operation Manual.
>>
GO TO 2.
PERFORM NECESSARY WORK
-
Perform configuration. Refer to Description.
-
Perform air bleeding. Refer to Description.
-
Perform adjustment of steering angle sensor neutral position. Refer to Description.
-
Perform calibration of decel/side G sensor. Refer to Description.
-
Adjustment of rear brake caliper initialization position. Refer to Description.
-
Perform the change of system mode. Refer to Description.
-
Perform self-diagnosis for “All self diagnosis result”.
-
Erase the memory of self-diagnosis results.
>>
End of work.
Other materials
Automatic air conditioner
Basic information
The automatic climate control system in the Nissan Armada is designed to provide
maximum comfort and convenience for both driver and passengers. You can operate
the system either through the dedicated front air conditioner control panel or directly
via the touchscreen climat ...
Precautions for Removing Battery Terminal
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time ev ...
Front Air Mix Door Motor
Removal and Installation
REMOVALFront Air Mix Door Motor (Driver Side)Remove instrument lower panel LH and steering column cover lower. Refer to Removal and Installation.
Remove driver knee air bag module. Refer to Removal and Installation.
Remove side ventilator duct 2 LH. Refer to Removal and Inst ...