Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Control Valve & Tcm
WARNING:
When replacing the control valve & TCM, perform the following work. For work procedure, refer to Work Procedure.
A/T fluid filling
Calibration of park position sensor
Vehicle specifications writing
CAUTION:
Since vehicle specifications are not yet written in a new TCM, it is necessary to write them with CONSULT.
A/T fluid level adjustment
Torque converter clutch point learning
Calibration of decel G sensor
Work Procedure
WARNING:
REPLACE A/T ASSEMBLY
Replace A/T assembly. Refer to Removal and Installation (2WD) or Removal and Installation (4WD).
>>
GO TO 2.
WRITING Vehicle SPECIFICATIONS
With CONSULT
Ignition ...
Work Procedure
WARNING:
REPLACE CONTROL VALVE & TCM
Replace control valve & TCM. Refer to Removal and Installation.
>>
GO TO 2.
REFILL A/T FLUID
Refill A/T fluid. Refer to Changing.
NOTE:
Just fill A ...
Other materials:
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing back door assembly.
REMOVAL
Remove roof rear garnish. Refer toRemoval a ...
Inspection
WARNING:
COMPONENT PART
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
Move wheel hub and bearing assembly in ...
Inspection
Inspection after Installation
Shift Button Operation
Check the shift button operation status according to the following procedure. When there is malfunction, repair or replace the electric shift selector.
CAUTION:
Work safely with the wheels chocked and the vehicle stopped.
Check that each shift bu ...
0.0067