Work Flow
Work ProcedureFront Disc Brake
Unit: mm (in)
Item Limit Brake pad Wear thickness 2.0 (0.079) Disc rotor Wear thickness 27.4 (1.079) Thickness variation (measured at 8 positions)* 0.006 (0.0002) Runout (with it attached to the vehicle) 0.035 (0.0014)
*To check if rotor imbalance, rotor runout or rotor deformation is o ...
Sanding
Aluminum alloy panels are softer than steel plates. It is important to select the proper type and grade of sanding disc. Also, care must be taken not to overgrind the surface.
Because aluminum powder is light and tends to float in the air, eyes and respiratory parts of the body must be fully protect ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
PERFORM SELF-DIAGNOSIS RESULT
Select “Self Diagnostic Result” mode of “INTELLIGENT KEY”, and check if DTC is detected.
Is DTC detected?
YES>>
Perfor ...