Nissan Armada 2025-2026 Service and Repair Manual: Sanding
Aluminum alloy panels are softer than steel plates. It is important to select the proper type and grade of sanding disc. Also, care must be taken not to overgrind the surface.
Because aluminum powder is light and tends to float in the air, eyes and respiratory parts of the body must be fully protected during grinding work.
| Tool | Coarse | Application |
|---|---|---|
| Disc sander | Approx. #120 |
|
| Double action sander | Approx. #120 - #180 |
|
Sheet Metal Work (aluminum)
Repairing aluminum alloy panels is basically the same as repairing steel panels. Special considerations for repairing aluminum alloy are listed below. ...
Hammering
Elongation of aluminum alloy during hammering will be greater than with steel plates. Therefore, a wooden or plastic hammer should be used with a softer blow to prevent stretching and work hardening o ...
Other materials:
Exploded View
Front bumper side bracket RH Front bumper side retainer RH Front bumper retainer upper Front bumper side stay RH Front bumper reinforcement Front bumper energy absorber A Front bumper energy absorber B RH Front bumper energy absorber C RH Front bumper energy absorber D Front bumper energy a ...
NVH Troubleshooting Chart
Possible cause and SUSPECTED PARTS Symptom Reference BRAKE Noise Shake Shimmy, Judder Pads damaged × — — FRONT DISC BRAKE: Inspection and Adjustment
REAR DISC BRAKE: Inspection and Adjustment
Pads uneven wear × — — FRONT DISC BRAKE: Inspection and Adjustment
REAR DISC BRAKE ...
Basic information
WARNING
Never attempt to lift two wheels of the Nissan Armada off the ground
while the engine is running and shift the transmission into any drive or reverse
position. This improper procedure may cause severe drivetrain damage or unexpected
vehicle movement, potentially leading to serio ...
0.0049