Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Driver Monitor Camera Control Unit

Work Procedure

Application Notice Type Description TYPE 1 When using KV99112700 for radar alignment. Refer to Description. TYPE 2 When using 1-20-2851-1 for radar alignment. Refer to Description. TYPE 1 Descr ...

Work Procedure

When driver monitor camera control unit is replaced, be sure to perform the specified incidental work in order to operate system normally. DRIVER MONOTOR CAMERA CONTROL UNIT CONFIGURATION >> ...

Other materials:

Precaution for ProPILOT Assist 2.1 System Service
ProPILOT Assist 2.1 assists driving operations and lane change operations to drive close to the center of the lane, up to the vehicle speed set by the driver, while keeping a proper distance from the vehicle ahead on highways and motorways. CAUTION: Be careful the followings and always drive safely. ...

Diagnosis Procedure
CHECK STEERING TILT MECHANISM Check for the following. Mechanism deformation or pinched foreign materials. Interference with other parts because of poor installation. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning parts. CHECK TILT SWITCH Che ...

General Specifications
Applied model Axle 4WD Engine VR35DDTT Transmission A/T Final drive model R180A Gear ratio 3.357 Number of teeth (Drive gear/Drive pinion) 47/14 Number of pinion gears 2 Drive pinion adjustment spacer type Collapsible Oil capacity Refer to Fluids and Lubricants. ...