CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.
Perform the following operations when replacing Intelligent Key unit. For details, refer to Work Procedure.
AFTER REPLACEMENT
CAUTION:
After replacing Intelligent Key unit, the following must be performed. Or not doing so, Intelligent Key unit control function does not operate normally.
Writing vehicle specification
Register Intelligent Keys
Work Flow
Work ProcedureRepair of Corroded Panel
(1) FILLING WITH FIBERGLASS
(a) Grind off the corroded portion of the panel with an air sander. If corrosion is severe, cut off the affected portion with a chisel or tinman's shears. Remove the paint from the surrounding areas.
(b) Hollow the area surrounding the repair hole by tapping with a hamme ...
Symptom Description
Symptom Result The brake pedal may occasionally vibrate slightly while braking. This occurs when the electrical brake control unit is operating normally and is not a malfunction. Operating noise may occur from the electrical brake control unit. Depending on vehicle condition (Auto ACC OFF etc. ...
Hazard warning flasher switch
Press the hazard warning flasher switch in the Nissan Armada to alert other drivers
when your vehicle must stop or is parked under emergency conditions. Once activated,
all turn signal lights will flash simultaneously to increase visibility.
WARNING
In an emergency, always move the Niss ...