Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Tcu

Work Flow

OVERALL SEQUENCE Reference 1··· Refer to Consult Function. Reference 2··· Refer to DTC Index. Reference 3··· Refer to Symptom Table. DETAILED FLOW INTERVIEW AND SYMPTOM CONFIRMATION Check t ...

Work Procedure

Description When TCU is replaced, TCU configuration is required. Preparation before configuration operation Subscribe to telematics service. Preregister user ID and password (can be performed from ow ...

Other materials:

Diagnosis Procedure
When ProPILOT Assist 1.1 system is active, the ProPILOT Assist 1.1 system does not perform any control even through there is a vehicle ahead. CHECK ProPILOT ASSIST 1.1 SYSTEM DISPLAY ON INFORMATION DISPLAY Start the self-diagnosis mode of combination meter. Refer to On Board Diagnosis Function. Che ...

Remote Engine Start Function Does Not Operate
Engine does not start when operating REMOTE ENGNE START button of Intelligent Key or telematics function of the smartphone. . NOTE: Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. CONDITIONS OF VEHICLE (OPERATING CONDI ...

Commercial Service Tool
Tool name Description Flare nut torque wrench a: 10 mm (0.39 in), 11 mm (0.43 in), 12 mm (0.47 in) Installing brake piping Brake caliper wrench Return the piston (Front brake caliper) Brake caliper wrench Return the piston (Rear brake caliper) ...