Nissan Armada 2025-2026 Service and Repair Manual: Adjustment
ADJUSTMENT AFTER INSTALLATION
Adjust each item of brake pedal after installing the brake pedal assembly to the vehicle. Refer to Inspection and Adjustment.
Perform stroke sensor 0 point learning. Refer to Work Procedure.
Inspection
INSPECTION AFTER REMOVAL
Check the brake pedal assembly for bend, damage, and cracks on the welded parts. If any is found, replace brake pedal assembly. ...
Brake Piping
...
Other materials:
Diagnosis Procedure
CHECK REAR POWER WINDOW SWITCH LH GROUND CIRCUIT
Check rear power window switch LH ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK REAR POWER WINDOW SWITCH LH
Check rear power window ...
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect automatic back door control unit harness connector.
Remove automatic back door control unit mounting nuts , and then remove automatic back door control unit .
INSTALLATION
Install in the reverse order of r ...
Special Service Tools
Tool number
(TechMate No.)
Tool name Description ST35652000
( − )
Shock absorber attachment
Disassembling and assembling shock absorber ST3127S000
(NI-25765-A)
Preload gauge
Measuring rotating torque of ball joint ...
0.0055