CHECK REAR POWER WINDOW SWITCH LH GROUND CIRCUIT
Check rear power window switch LH ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK REAR POWER WINDOW SWITCH LH
Check rear power window switch LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Rear door glass run Rear door panel Hole seal 1 Hole seal 2 Rear door glass Rear door lower sash upper Rear door lower sash lower Rear door inner frame rear Rear door inner frame front Rear door regulator assembly Rear door power window motor Rear door regulator : Clip : Always replac ...
EVAP CANISTER : Inspection
Check EVAP canister as per the following:
Block port .
Blow air into port and check that it flows freely out of port .
Release blocked port .
Apply vacuum pressure to port and check that vacuum pressure exists at the ports and .
Block port and .
Apply pressure to port and check that there is ...