Removal and Installation
REMOVAL
-
Remove front center console finisher assembly. Refer to Removal and Installation.
-
Remove auto height mode control switch harness connector.
-
Remove auto height mode control switch.
INSTALLATION
Installation is in the reverse order of removal.
Other materials
Symptoms and Troubleshooting
Symptom Table
The diagnostics item numbers show the sequence for inspection. Inspect in order from item 1.
Perform diagnoses of symptom table 1 before symptom table 2.
SYMPTOM TABLE 1 Diagnostic item Reference Symptom
Poor performance
Driving performance Strange noise
Shift point is hi ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Vin Registration
Work Procedure
VIN Registration is an operation to register the VIN in ADAS control unit.CHECK VIN
Check VIN of vehicle and note it. For VIN stamped position, refer to Information About Identification or Model Code .
>>
GO TO 2 .
PERFORM VIN REGISTRATION
With CONSULT
Ignition switch ON.
...