Removal and Installation
REMOVAL
Remove automatic back door switch finisher. Refer to Removal and Installation.
Disengage automatic back door close switch assembly fixing pawls using a remover tool (A), and then remove automatic back door close switch assembly 
from automatic back door switch finisher.
 |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Basic information
WARNING
Do not allow children to play with seat belts inside the Nissan Armada. Many
seating positions are equipped with Automatic Locking Retractor (ALR) seat belts.
If a belt becomes wrapped around a child’s neck while ALR mode is active, it may
tighten and cause serious injury or dea ...
Precautions for Pop up Engine Hood
PRECAUTIONS FOR POP UP ENGINE HOOD : Precautions
WARNING:
Always observe the following items for preventing accidental activation.
Before removal or installation of the pop-up engine hood and harness, always OFF the ignition switch, disconnect the battery negative terminal, and wait for 3 minutes ...
Rear Cooler Pipe Assembly
Removal and Installation
REMOVALCAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant leak is detected, never perform lubricant return operation. Refer to Perform Lubricant Return Operation.
When disconnec ...