NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Automatic Back Door Close Switch

Nissan Armada 2025-2026 Service and Repair Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock / Automatic Back Door Operation Does Not Operate / Automatic Back Door Close Switch

Description

Automatic back door open/close function does not operate using automatic back door close switch.

Diagnosis Procedure

CHECK AUTO OPEN/CLOSE FUNCTION

Check auto open/close function using automatic back door switch.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure.

CHECK AUTOMATIC BACK DOOR CLOSE SWITCH

Check automatic back door close switch.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

  1. Replace automatic back door control unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

INSPECTION END

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Other materials

    Front Pillar Garnish
    Removal and Installation CAUTION: Never damage the body panel.REMOVALApply protective tapes (A) on assist grip to protect it from damage. Disengage assist grip cap fixing pawls of assist grip using a remover tool (A), and then remove assist grip cap of assist grip. : Pawl Remove assist grip ...

    Without Automatic Drive Positioner
    Diagnosis Procedure CHECK DOOR MIRROR MECHANISM Check the following items. Damage, deformation and foreign matter pinching of the door mirror mechanism. Damage of harness due to rubbing and pinching. Interference with other components. Installed incorrectly. Is the inspection result normal ...

    Steering Torque Calibration
    Work Procedure After replacing the ADAS control unit 2 and after replacing or removing the following steering components, the steering torque calibration is necessary to operate the system normally. Steering wheel Spiral cable Steering angle sensor Steering column assembly Steering gear ass ...