Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect automatic back door control unit harness connector.
Remove automatic back door control unit mounting nuts 
, and then remove automatic back door control unit 
.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing automatic back door control unit, perform additional service when replace automatic back door control unit. Refer to Description.
Other materials
Front Fender
Exploded View
Hood side seal
Front fender drip cover
Front fender bracket
Front fender assembly
Front fender protector tape
Front fender duct
Front fender baffle
Fender cover LH
Fender cover RH
Double-sided tape [t: 0.8 mm (0.031 in)]
: C ...
Cumulative Battery Discharge Current Clear
Description
CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.NOTE:
The cumulative battery discharge current value i ...
Vr35ddtt
Exploded View
Engine assembly
Alternator
“B” terminal harness
Alternator harness connector
: vehicle front
: N·m (kg-m, ft-lb)
, , , : Indicates that the part is connected at points with same symbol in actual vehicle.
Removal and Installation ...