Removal and Installation
REMOVAL
-
Remove back door finisher. Refer to Removal and Installation.
-
Disconnect license plate lamp harness connectors.
-
Remove back door opener switch assembly fixing pawls using a remover tool (A), and then remove back door opener switch
.
: Pawl
INSTALLATION
Install in the reverse order of removal.
Other materials
MOD system operation
The Nissan Armada MOD system activates automatically under the following conditions:
When the transmission is shifted into R (Reverse).
When the CAMERA/
button is pressed to enable the Around View Monitor display.
When the Nissan Armada vehicle speed drops below approximately 5 MPH (8 ...
Squeak and Rattle Trouble Diagnoses
Work Flow
CUSTOMER INTERVIEW
The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain all the facts and conditions that exist when the noise occurs (or does not occur).
If there is more than one noise in the vehicle, perform a diagnosis and re ...
Rear Spoiler
Exploded View
Grommet
Rear spoiler cover
Rear spoiler
: Clip
: Pawl
: Always replace after every disassembly.
, , : Indicates that the part is connected at points with same symbol in actual vehicle.
Removal and Installation
REMOVALRemove back door trim. Refer to Removal and ...