Exploded View
 |
Bracket RH |  |
AV control unit |  |
Bracket LH |
| : vehicle front | |||||
Removal & Installation
CAUTION:
Before replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT". For details, Refer to Work Procedure.
ADDITIONAL SERVICE WHEN REPLACING
If the following parts are replaced or removed, be sure to perform the specified incidental work in order to operate the system normally.
○: Application
| Parts name | Work content | |
|---|---|---|
| Replace | Remove | |
| AV control unit | ○ | — |
REMOVAL
Remove the front center console body assembly. Refer to Removal and Installation.
Remove the AV control unit mounting nuts 
and bolt 
, and then remove AV control unit .
Remove the connector and remove the AV control unit from the vehicle with the bracket attached.
INSTALLATION
CAUTION:
After replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT". For details, Refer to Work Procedure.
Installation is in the reverse order of removal.
Other materials
Fuel Injector and Fuel Tube
Exploded View
CAUTION:
Never disassemble or remove components beyond the configuration shown in the figure.
Fuel rail pressure sensor
Fuel rail (bank 1)
Stud bolt
Fuel tube insulator
Fuel tube 2
Fuel tube 1
O-ring
Backup ring
Injector holder
Fuel injector
Decoupling ...
Satellite Sensor
Exploded View
Front door satellite sensor
B-pillar satellite sensor
C-pillar satellite sensor
: vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activatio ...
Configuration (bcm)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification ...