Removal and Installation
REMOVAL
Remove back door inner finisher. Refer to Removal and Installation.
Disconnect back door lock & closure assembly harness connector.
Remove back door lock & closure assembly mounting bolts, and then remove back door lock & closure assembly from back door panel.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check back door lock. Refer to Inspection.
Inspection
After opening and closing the back door, check that door is fixed to the vehicle body normally.
Check the lock/unlock operation of back door lock.
Check the back door lock lubrication condition. If necessary, apply body grease to back door lock.

![]() |
: Body grease |
Unlock procedures
NOTE:
Release lock according to the following procedures when lock cannot be unlocked due to a malfunction of back door lock or battery discharge.
Operated opener lever
of back door lock & closure assembly to unlock back door lock.

When lock cannot be unlocked operating opener lever, release lock according to the following procedures.Remove upper part of back door inner finisher to secure work space. Refer to Removal and Installation.
CAUTION:
Replace back door inner finisher when it is damaged.
Remove mounting bolts
, and then remove back door lock actuator
.

CAUTION:
When removing back door lock actuator, replace back door lock & closure assembly with a new one. Refer to Removal and Installation.
Operated opener lever of back door lock & closure assembly to unlock back door lock.Other materials
Rear automatic air conditioning system
Basic information
The rear automatic climate control system in the Nissan Armada is engineered
to provide enhanced comfort for all passengers, especially those seated in the second
and third rows. When the front air conditioning system of the Nissan Armada is activated,
the rear system become ...
Accelerator Pedal Released Position Learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal position sensor ...
Engine Coolant
Service Data
ENGINE COOLANT CAPACITY (APPROXIMATELY)Unit: ℓ (US qt, Imp qt) Engine coolant capacity [With reservoir tank (“MAX” level)]
13.0 (13-6/8,11-4/8)
Reservoir tank engine coolant capacity (At “MAX” level)
1.61 (1-6/8,1-3/8)
...
