Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Fully open back door.
Apply protective tape (A) on back door panel to protect it from damage.
Disengage back door upper garnish fixing pawls and metal clips using a remover tool (A), and then remove back door upper garnish.
 |
: Pawl |
 |
: Metal clip |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Visually check metal clips for deformation and damage during installation. Replace with new ones if necessary.
-
Check in advance that pawls and metal clips are accurately aligned with the portions on back door panel, and then install by pressing in.
Other materials
Air Breather Hose
Exploded View
Bracket
A/T assembly
Air breather hose
Clip
: N·m (kg-m, ft-lb)
Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go dow ...
Front Fender Protector Tape
Removal and Installation
REMOVALRemove front fender protector tape from front fender assembly. INSTALLATIONNote the following items, and then install in the reverse order of removal.CAUTION:
Never reuse front fender protector tape. Always replace it with a new one when it is removed.
Degrease fr ...
Fuse Inspection
How To Check
If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
Use fuse of specified rating. Never use fuse of more than specified rating.
Do not partially install fuse; always insert it into fuse holder properly.
Remove fuse for “ELECTRICAL PARTS (BA ...