Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Remove back door lower finisher. Refer to Removal and Installation.
Apply protective tapes (A) on back door panel to protect it from damage.

Insert remover tool (A) close to clip when starting to remove back door inner finisher.
Disengage back door inner finisher fixing clips and pawls according to numerical order 1→15 indicated by arrow as shown in the figure, and then remove back door inner finisher.

CAUTION:
- Always use remover tool, when removing fixing clips and pawls.
- To avoid damage, disengage fixing clips and pawls according to numerical order and also never pull back door inner finisher without disengage fixing clips.
![]() |
: Clip |
![]() |
: Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Visually check clips for deformation and damage during installation. Replace with new ones if necessary.
-
Check in advance that clips and pawls are accurately aligned with the portions on back door panel, and then install by pressing in.
Other materials
Transfer Range Position Sensor
Exploded View
Transfer assembly
Transfer range position sensor
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air sus ...
Transfer Assembly
Exploded View
Transfer assembly
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Li ...
Seat Lifting
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK LIFTING SENSOR
Check lifting sensor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>
Check intermitte ...

