NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Back Pillar Garnish

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Interior / Luggage Trim / Back Pillar Garnish

Removal and Installation

CAUTION:

Never damage the body panel.

REMOVAL

CAUTION:

When removing, always use a remover tool that is made of plastic to prevent damage to the parts.

Remove roof rear garnish. Refer to Removal and Installation.

Release back pillar garnish portion of back door weather-strip. Refer to Removal and Installation.

Remove luggage side lower finisher. Refer to Removal and Installation.

Apply protective tape (A) on back pillar garnish to protect it from damage.

Disengage seat belt finisher fixing pawls using a remover tool (A), and then remove seat belt finisher.

: Pawl

Remove back pillar garnish mounting bolt.

Disengage back pillar garnish fixing clips and pawl using a remover tool (A), and then remove back pillar garnish.

: Clip
: Pawl

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • Visually check clips for deformation and damage during installation. Replace with new ones if necessary.

  • Check in advance that clips and pawl are accurately aligned with the portions on body panel, and then install by pressing in.

    Other materials

    Basic information
    The Idling Stop System in the Nissan Armada is designed to enhance fuel efficiency, reduce exhaust emissions, and minimize unnecessary engine noise during short stops such as traffic lights or congestion. When the Nissan Armada comes to a complete stop, the system automatically shuts off ...

    Facial Recognition Check
    Work Procedure If system detects that driver is not facing forward even though driver is facing forward, perform face recognition check.PREPARATION BEFORE FACE RECOGNITION CHECK Make sure that all of the following conditions are satisfied vehicle speed is 0 km/h (stopped). Shift position is "P" ...

    General Maintenance
    General Maintenance General maintenance includes those items which should be checked during the normal day-to-day operation of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform checks and inspections themselves or have their INFINITI retailers d ...